enable wireless ports interface client-scan
enable wireless ports [<portlist> | all] interface [1 | 2] client-scan
Description
Enables the client scan feature on the specified wireless interface.
Syntax Description
portlist
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all
Specifies all ports.
interface
Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Use this command to enable the client scan feature on the specified wireless interface.
Example
The following command enables port 1:31 and interface 2:
enable wireless ports 1:31 interface 2 client-scan
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
enable wireless ports interface client-scan
1321