Config Ospf Asbr-Filter - Extreme Networks ExtremeWare Command Reference Manual

config ospf asbr-filter

config ospf asbr-filter [<access profile> | none]
Description
Configures a route filter for all ASBR routers.
Syntax Description
access profile
none
Default
N/A.
Usage Guidelines
For switches configured to support RIP, BGP, VIP and static route re-distribution into OSPF, an access
profile can be used to limit the routes that are advertised into OSPF for the switch as a whole.
Example
The following command configures a route filter for all routes OSPF exports from RIP or other sources:
config ospf asbr-filter subnet25-filter
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an access profile.
Specifies not to apply an ASBR filter.
config ospf asbr-filter
935