Configure Wireless Ports Interface Ap-Scan Off-Channel Max-Wait - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands
configure wireless ports interface ap-scan off-channel
max-wait
configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
off-channel max-wait <num>
Description
Use this command to set the maximum time an off-channel scan waits at a particular channel.
Syntax Description
portlist
all
interface
num
Default
600 ms.
Usage Guidelines
Use this command to specify the time that the access point (AP) should wait on a particular channel.
Example
The following command sets the wait time at 5 milliseconds:
configure wireless ports 1:5 interface 2 ap-scan off-channel max-wait 5
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1274
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies the wait time in milliseconds. Valid entries are between 10 and
10000 milliseconds.
ExtremeWare 7.5 Command Reference Guide