Configure Wireless Ports Interface Ap-Scan Off-Channel Continuous - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface ap-scan off-channel
continuous
configure wireless ports [all | <portlist>] interface [1 | 2] ap-scan
off-channel continuous [on | off]
Description
Turns continuous off-channel scan on or off.
Syntax Description
portlist
all
interface
on
off
Default
Scan on.
Usage Guidelines
Use this command to toggle continuous off-channel on a particular interface either on or off.
Example
The following command turns off the off-channel scan for wireless port 1:5 using interface 2:
configure wireless ports 1:5 interface 2 ap-scan off-channel continuous off
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies to turn the continuous off-channel scan on.
Specifies to turn the continuous off-channel scan off.

configure wireless ports interface ap-scan off-channel continuous

1273