This Command Is Available On The Summit 300-48, Summit 300-24, Summit 400-24P And Alpine Switches.enable Wireless Ports Interface Svp - Extreme Networks ExtremeWare Command Reference Manual

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.enable wireless ports interface svp

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine
enable wireless ports interface svp
switches.
enable wireless ports [<portlist> | all] interface [1 | 2] svp
Description
Enables the QoS protocol, SpectraLink Voice Protocol (SVP), for VoIP on the specified port and interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form
1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
Default
Disabled
Usage Guidelines
Use this command to implement the QoS protocol for VoIP. By enabling QoS for VoIP, you give voice
traffic a higher priority than data traffic. VoIP traffic has less tolerance for error recovery than data.
Although voice traffic can tolerate some degree of error recovery, it can be noticeable to users. This
command allows you to enable QoS for VoIP on the port and interface level.
Example
The following example, turns on SVP on port 17 and interface 1:
enable wireless ports 17 interface 1 svp
History
This command was first available in ExtremeWare 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide 1323