Configure Wireless Ports Interface Rf-Profile - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface rf-profile

configure wireless ports <portlist> interface [1 | 2] rf-profile <name>
Description
Attaches a port or ports and interface to an RF profile.
Syntax Description
portlist
interface
name
Default
A for interface 1.
B_G for interface 2.
Usage Guidelines
Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and interface
2 supports 802.11b/g radio signals. The
to configure one of the two individual interfaces (1|2) on a port or ports.
All ports in the port list must have the same wireless port version.
Example
The following command attaches the RF profile radio1 to interface 1 on port 1:7 on a Summit 300-48:
configure wireless port 1:7 interface 1 security-profile radio1
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies an interface: 1 or 2.
Specifies the name of the profile.
configure wireless port interface
configure wireless ports interface rf-profile
command allows you
1291