Create Rf-Profile Copy - Extreme Networks ExtremeWare Command Reference Manual

create rf-profile copy

create rf-profile <profile_name> copy <name>
Description
Creates a new RF profile by copying an existing RF profile and assigning a new name.
Syntax Description
profile_name
name
Default
N/A.
Usage Guidelines
Use this command to create a new profile identified by the string name. The copy argument specifies
the name of an existing profile from which to obtain the initial values.
Example
The following command creates a new RF profile called rfprof_alpha from an existing profile called
wireless_prof:
create rf-profile rfprof_alpha copy wireless_prof
The following command can be used to validate that you created the new RF profile as entered:
show rf-profile rfprof_alpha
or
show rf-profile
The latter command shows all RF profiles.
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies the name of the new RF profile.
Specifies the names of the RF profile to be copied.
create rf-profile copy
1299