Configure Wireless Ports Interface Client-Scan Results Size - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface client-scan results size

configure wireless ports [<portlist> | all] interface [1 | 2] client-scan
results size <value>
Description
Configures the maximum number of entries in the client scan information table.
Syntax Description
portlist
all
interface
value
Default
128.
Usage Guidelines
Use this command to specify the maximum number of entries that the client-history table can store.
Example
The following command configures the maximum number of entries in the client scan table as 1000 for
port 1:5 and interface 2:
configure wireless port 1:5 interface 2 client-scan results size 1000
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1288
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies the maximum number of entries in the client scan information table.
The default value is 128. (Range is unlimited.)
ExtremeWare 7.5 Command Reference Guide