Enable Wireless Ports Interface Client-History - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Wireless Commands

enable wireless ports interface client-history

enable wireless ports [<portlist> | all] interface [1 | 2] client-history

Sets the Altitude 300 to log client historical information.

Syntax Description

Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form

1, 2, 1:2, 3-5.

Specifies all ports.

Specifies an interface: 1 or 2.

Usage Guidelines

Use this command to get the detail status about each associated client.

The following example sets port 1:23 and interface 1 to keep historical information:

enable wireless ports 1:23 interface 1 client-history

This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.

Platform Availability

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5