Configure Wireless Ports Interface Ap-Scan Off-Channel Min-Wait - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface ap-scan off-channel
min-wait
configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
off-channel min-wait <num>
Description
Use this command to set the minimum time an off-channel scan waits at a particular channel.
Syntax Description
portlist
all
interface
num
Default
60 ms.
Usage Guidelines
Use this command to specify the minimum time that the access point (AP) should scan a particular
channel.
Example
The following command sets the wait time at 5 milliseconds:
configure wireless ports 1:5 interface 2 ap-scan off-channel min-wait 5
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies the minimum wait time in milliseconds. Valid entries are between 10
and 10000 milliseconds.

configure wireless ports interface ap-scan off-channel min-wait

1275