Configure Wireless Ports Health-Check - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports health-check

configure wireless ports [<portlist> | all] health-check [on | off]
Description
Configures whether the health check reset function is on or off for the specified port or ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form 1,
2, 1:2, 3-5.
all Specifies all ports.
on Indicates that the health check reset function is on. The port should be reset if the health check timer
expires.
off Indicates that the health check reset function is off. The port is not reset if the health check timer
expires.
Default
On
Usage Guidelines
This command determines whether the port is reset if the health check timer expires.
Example
The following command configures port 1:18 on the Summit 300-48 to use the health check facility:
configure wireless ports 1:18 health-check on
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1270 ExtremeWare 7.5 Command Reference Guide