Configure Rf-Profile Long-Retry - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure rf-profile long-retry

configure rf-profile <name> long-retry <value>
Description
Specifies the number of transmission attempts of a frame larger than the request-to-send (RTS)
threshold.
Syntax Description
name Specifies the names of the RF profile.
value Specifies the number of transmission attempts of a frame. Valid values are from 1 to 255.
Default
7
Usage Guidelines
Use this command to set the number of transmission attempts for frames larger than the RTS threshold
setting in the same RF profile. The
will be discarded when a station attempts to retransmit a frame. Long retry applies to frames longer
than the RTS threshold and it is set to 7 by default. A frame requiring RTS/CTS clearing is
retransmitted seven times before being discarded.
To specify a the number of transmission attempts of a frame smaller than the RTS threshold, use the
following command:
configure rf-profile <name> rts-threshold <value>
Examples
The following command sets the transmission attempts to 10:
configure rf-profile rfprof1 long-retry 10
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1258
value specifies the number of attempts before a frame
long-retry
.
ExtremeWare 7.5 Command Reference Guide