Configure Wireless Ports Interface Security-Profile - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface security-profile

configure wireless ports <portlist> interface [1 | 2] security-profile
<name>
Description
Attaches a port or ports and interface to a security profile.
Syntax Description
portlist
interface
name
Default
Unsecure.
Usage Guidelines
Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and interface
2 supports 802.11b/g radio signals. The
to configure one of the two individual interfaces (1|2) on a port or ports.
All ports in the port list must have the same wireless port version.
Example
The following command attaches the security profile secure-wep to interface 1 on port 1:7 on a Summit
300-48:
configure wireless port 1:7 interface 1 security-profile secure-wep
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1292
Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies an interface: 1 or 2.
Specifies the name of the profile.
configure wireless port interface
command allows you
ExtremeWare 7.5 Command Reference Guide