Create Rf-Profile Mode - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

create rf-profile mode

create rf-profile <profile_name> mode [ A | B | B_G | G ]
Description
Creates a new RF profile by defining the interface mode,.
Syntax Description
profile_name
A
B
B_G
G
Default
N/A.
Usage Guidelines
Use this command to create a new profile without copying from an existing profile.
Example
The following command creates a new RF profile called rfprof_alpha using interface mode G:
create rf-profile rfprof_alpha mode g
The following command can be used to validate that you created the new RF profile as entered:
show rf-profile rfprof_alpha
or
show rf-profile
The latter command shows all RF profiles.
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
1300
Specifies the name of the new RF profile.
Specifies the 802.11a interface mode.
Specifies the 802.11b interface mode.
Specifies the 802.11b or 802.11g interface modes.
Specifies the 802.11g interface mode.
ExtremeWare 7.5 Command Reference Guide