JunosE 11.3.x System Basics Configuration Guide
Managing the Ethernet Port on the SRP Module
388
hf63036.hfx
hf63037.hfx
host1#show hotfix
name
active
armed
-----------
------
-----
hf63035.hfx
hf63036.hfx
X
X
hf63037.hfx
X
X
Now suppose the user attempts to deactivate hf63036.hfx:
host1#no hotfix activate hf63036.hfx
The hotfix, 23453036, has the following active dependents which must be deactivated
first:
34563037
% De-activation failed.
The command fails because hf63037.hfx is dependent on hf63036.hfx. Interdependent
hotfixes must be deactivated and disarmed in the reverse order that they were activated.
When 6-0-1p0-5.rel is re-armed and the router reloaded, the hotfix loader determines
that the startup hotfixes, hf63036.hfx and hf63037.hfx, are incompatible with the release.
It disarms these hotfixes. The user decides to delete the now unnecessary hotfixes from
the router.
host1# delete hf63036.hfx
host1# delete hf63037.hfx
host1# dir
Active System Controller:
file
-------------------------
reboot.hty
system.log
haIpSetup.mac
6-0-1p0-5.rel
6-1-0.rel
hf63035.hfx
host1# show hotfix detail
name
active
-----------
------------
hf63035.hfx
X
You can configure the Fast Ethernet management port to access the router from a Telnet
session or SNMP.
On ERX7xx models, ERX14xx models, and ERX310 router, the Fast Ethernet port is located
on the SRP I/O module. For more information about configuring the Fast Ethernet port
on an SRP I/O module, see ERX Hardware Guide, Chapter 7, Accessing ERX Routers.
27445
27445
03/07/2005 16:12:05
28324
28324
03/07/2005 16:13:25
requires
--------
23453036
unshared
size
size
---------
---------
596288
596288
6762
6762
4874
4874
125987342
125987342
148489185
148412851
30445
30445
armed
requires
-----
--------
X
---
!
!
date (UTC)
-------------------
03/07/2005 19:35:52
03/07/2005 17:30:08
03/24/2004 10:02:08
02/30/2005 18:17:32
02/28/2005 20:19:20
03/07/2005 14:04:02
Copyright © 2010, Juniper Networks, Inc.
in
use
---
!
!
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 and is the answer not in the manual?