Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 414

Software for e series broadband services routers system basics configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04:
Table of Contents

Advertisement

JunosE 11.3.x System Basics Configuration Guide
384
The dir command displays all hotfixes present on the local flash card. The in use field
indicates that the hotfix is either currently activated or armed to be activated as a startup
hotfix for the currently armed release.
host1# dir
*** Active/standby file systems are not synchronized. ***
Active System Controller:
file
-------------------------
reboot.hty
system.log
haIpSetup.mac
6-0-1p0-5.rel
hf63035.hfx
hf63030.hfx
...
You can use the show version command to display a summary of each of the hotfixes
currently activated on the system, including the hotfix name and hotfix ID.
host1#show version
Juniper Edge Routing Switch ERX-1400
Copyright (c) 1999-2005 Juniper Networks, Inc.
System Release: 6-0-1p0-5.rel
Version: 6.0.1 patch-0.5
Active hotfixes:
hf63036.hfx (Id: 1020)
hf63037.hfx (Id: 1030)
System running for: 7 days, 3 hours, 55 minutes, 5 seconds
(since FRI FEB 04 2005 13:01:30 UTC)
The show boot command displays the current boot settings, including armed hotfixes
that will be activated when the router reboots.
host1#show boot
System Release:
6-0-1p0-5.rel
Armed Hotfixes: hf63035.hfx
hf63036.hfx
hf63037.hfx
System Configuration: running-configuration
The header of the show configuration command output includes the armed hotfix
summary. You can issue the show configuration system file-system command to display
the boot hotfix commands that restore the router to its current configuration when you
issue the configuration script on a router configured with factory defaults.
Hotfixes that are active when you issue the show configuration command are not part
of the command output or the resulting configuration script. Only armed hotfixes are
part of the show configuration script.
host1#show configuration system file-system
! Configuration script being generated on TUE MAR 22 2005 16:43:41 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.0.1 patch-0.5
!
Active hotfixes: hf63036.hfx (Id: 23453036)
unshared
size
size
---------
---------
596288
596288
6762
6762
4874
4874
148489185
148489185
30445
30445
28675
28675
All rights reserved.
(January 28, 2005
(January 28, 2005
14:55)
Copyright © 2010, Juniper Networks, Inc.
in
date (UTC)
use
-------------------
---
03/07/2005 19:35:52
03/07/2005 17:30:08
03/24/2004 10:02:08
02/28/2005 18:17:32
!
03/07/2005 14:04:02
!
03/05/2005 18:22:32
14:55)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents