Accessing Command Modes; Table 9: Pagination Keys; Table 10: Command Mode Overview - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide

Accessing Command Modes

Table 10: Command Mode Overview

Mode Name Use of Mode
AAA Profile
Configuration
Address Family
Configuration
ATM VC Class
Configuration
66

Table 9: Pagination Keys

Key Function
Enter Scrolls down one more line
Spacebar Displays one more screen
+ Displays all output lines that contain the text string
– Displays all output lines that do not contain the text string
/ Displays all output lines starting at the first line that contains the text string
Any other key Aborts output and returns you to command prompt
Table 10 on page 66 describes the command modes available in the CLI.
Configure new AAA
profiles.
Configure BGP or RIP
address family
parameters.
Configure a class of
attributes for an ATM
data PVC.
Access to Mode
From Global Configuration
mode, use aaa-profile
command.
Prompt:
host1(config-aaa-profile)#
From Global Configuration
mode, use router bgp or
router rip to enter Router
Configuration mode. From
Router Configuration, use
the address-family
command.
Prompt:
host1(config-router-af)#
From Global Configuration
mode, use the vc-class
atm command, and
specify the name of the
VC class.
Prompt:
host1(config-vc-class)#
Exit from Mode
Use the exit command to return
to Global Configuration mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command twice to
return to Global Configuration
mode.
Press Ctrl+z to return to Exec
mode.
Use the exit command to return
to Global Configuration mode.
Press Ctrl+z to return to Exec
mode.
Copyright © 2010, Juniper Networks, Inc.