Monitoring Schema Statistics - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide
Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS
schema (continued)
Bulkstats Output
Column Name MIB File
QRedDiscardPkts rsacctng
QRedDiscardOctets rsacctng

Monitoring Schema Statistics

show bulkstats schema
224
MIB Object Name
rsAcctngRedDropPackets
rsAcctngRedDropBytes
You are able to display your configuration and monitor the data generated by schemas.
Use to display data on the bulk statistics schema.
Field descriptions
Schema Information:
Index—Index number of the schema
Subtree—Type of bulk statistics schema configured on the collector: igmp, if-stack,
if-stats, policy, QoS, or system
CollectorIndex—Bulk statistics collector index (same as the SNMP table index)
State
active—Schema is properly configured and currently active
notInService—Schema has been decommissioned by a management client
notReady—Schema does not have enough configuration information to go active
error—Configuration/operational error
Subtree List—Types of statistics the schema is configured to receive
Example 1—Displays bulk statistics information for a schema that is configured to
retrieve the if-stack and system information.
host1#show bulkstats schema
CLI Configuration Description
red-drop-packets The number of red packets which
were chosen to be discarded
even though no errors had been
detected to prevent their being
received.
The attribute is a 64–bit integer.
red-drop-bytes The number of red octets which
were chosen to be discarded
even though no errors had been
detected to prevent their being
received.
The attribute is a 64–bit integer.
Copyright © 2010, Juniper Networks, Inc.