Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 611

Copyright © 2010, Juniper Networks, Inc.
Table 58: E Series Hardware Standards (continued)
Reference
EN300 386-2:1997 EMC requirements for Telecom Network
Equipment-Telco Centers
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User's Guide (2001)
EN60950:2000, 3rd Edition, Safety of Information Technology Equipment
ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic
Compatibility (EMC) requirements
FCC Part 15 Class A
FCC PART 68
GR-63 (LSSGR, FD-15): Network Equipment Building System (NEBS)
Requirements: Physical Protection, Issue 1, October 1995
GR-1089 (LSSGR, FD-15): Electromagnetic Compatibility and Electrical
Safety - Generic Criteria for Network Telecommunications Equipment,
Issue 2, Revision 1, February 1999
IEC 825-1, Safety of Laser Products - Part 1
IEC 60950-1(2001-10) Ed. 1.0 Information technology equipment - Safety
- Part 1: General requirements
IECS-003 Issue 3 Class A
ITUT G.703, Physical/electrical characteristics of hierarchical digital
interfaces (November 2001)
Low Voltage Directive (73/23/EEC)
PD7024—Essential requirements for terminal equipment intended for
connection to unstructured digital leased circuits of the public
telecommunications network using a CCITT recommendation G,703
interface at a rate of 2048 kbit/s with a 75 ohm unbalanced presentation,
1994
RTTE Directive (1999/5/EEC)
SR-3580 (FD-15): Network Equipment Building System (NEBS) Criteria
Levels, Issue 1, November 1995
Appendix B: References
Protocol or
Feature
Telecom
EMC
EMC
Safety
Safety
EMC
EMC
EMC
NEBS
NEBS
Safety
Safety
EMC
Cables
Safety
Telecom
Telecom
Safety
581