Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 431

Copyright © 2010, Juniper Networks, Inc.
Note: '---' indicates empty slots.
'???' indicates data not available.
'***' indicates board running incompatible version of software.
Example 3—Displays detailed information about the average CPU utilization percentage
calculated over 5-second, 1-minute, and 5-minute intervals for each module installed
in an E320 router.
In this example, slots 3, 5, 12, 14, and 16 are empty (as indicated by the --- symbol),
fabric slices are present on the SFM-100 modules in slots 8, 9, and 10 (also indicated
by the --- symbol), the CPU utilization for the LM-4 module installed in slot 1 is
unavailable (as indicated by the ??? symbol), and the SRP-100 module installed in
slot 7 is running an incompatible version of JunosE Software (as indicated by the ***
symbol).
host1#show utilization detail
Please wait...
System Resource Utilization
---------------------------
slot type
---- ----------
0 LM-4 9
1 LM-4 ???
2 LM-4 23
3 --- ---
4 LM-4 60
5 --- ---
6 SRP-100 15
7 SRP-100 10
8 SFM-100 ---
9 SFM-100 ---
10 SFM-100 ---
11 LM-4 60
12 --- ---
13 LM-4 68
14 --- ---
15 LM-4 66
16 --- ---
Note: '---' indicates empty slots or fabric Slices.
'???' indicates data not available.
'***' indicates board running incompatible version of software.
See show utilization.
last
heap available bw
(%) cpu (%) exceed
---- --------- ------
1 ---
??? ---
3 ---
--- ---
1 ---
--- ---
3 ---
1 ---
--- ---
--- ---
--- ---
1 ---
--- ---
3 ---
--- ---
1 ---
--- ---
Chapter 6: Managing Modules
5 1 5
sec min min
cpu cpu cpu
(%) (%) (%)
--- --- ---
1 1 1
??? ??? ???
??? 4 8
--- --- ---
1 1 1
--- --- ---
3 2 3
*** *** ***
--- --- ---
--- --- ---
--- --- ---
1 1 1
--- --- ---
3 3 3
--- --- ---
1 1 1
--- --- ---
401