Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 209

Copyright © 2010, Juniper Networks, Inc.
Test—Type of trigger test to perform
SampleType—Type of sampling (absolute or delta) to perform
ValueID—Object ID of the MIB sample for this trigger
ValueIDLimit—Not supported in this release; reads as zero
ValueIDWildcard—Not supported in this release; reads as False
ContextName—Management context (for example, router1) from which to obtain
mteTriggerValueID
ContextNameRgulrExprssn—Not supported in this release
ContextNameLimit—Not supported in this release; reads as zero
ContextNameWildcard—Not supported in this release; reads as False
Frequency—Frequency at which this trigger is sampled
ObjectsOwner—Not supported in this release
Objects—Not supported in this release
Enabled—State (False [disabled] or True [enabled]) of the trigger
EntryStatus—Active/inactive status of the instance
Boolean
Comparison—Comparison value for this trigger
Value—Object ID value to which this trigger compares
Startup—Whether or not this trigger performs a Boolean test on startup
ObjectsOwner—Owner of this object
Objects—Name of this object
EventOwner—Owner of this event
Event—Name of this event
Existence
Test—Test type for this trigger
Startup—Startup condition for this trigger
ObjectsOwner—Owner of this object
Objects—Name of this object
Chapter 4: Configuring SNMP
179