Table 41: Combinations Of Line Modules For Line Rate Performance-Srp-10G Module In An Erx7Xx Model; Table 42: Combinations Of Line Modules For Line Rate Performance-Srp-10G Module In An Erx1410 Router; Table 43: Combinations Of Line Modules For Line Rate Performance-Srp-5G+ Module In An Erx705 Router - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Software for e series broadband services routers system basics configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04:
Table of Contents

Advertisement

JunosE 11.3.x System Basics Configuration Guide
362
Table 41: Combinations of Line Modules for Line Rate
Performance—SRP-10G Module in an ERX7xx Model
Possible Combinations of Line
Modules
One supported line module and
one empty slot in slot group 1
NOTE: The SRP-10G module
supports all line modules listed
in Table 40 on page 361.
Two OCx/STMx ATM line
modules in slot group 1
One supported line module in
slot groups 2, 3 and 4
Table 42: Combinations of Line Modules for Line Rate
Performance—SRP-10G Module in an ERX1410 Router
Possible Combinations of Line Modules
One supported line module and two
empty slots in any slot group
NOTE: The SRP-10G module supports
all line modules listed in Table 40 on
page 361.
Two OCx/STMx ATM line modules and
one GE/FE module and one empty slot
in any slot group (bandwidth
oversubscription enabled)
One OC3/STM1 GE/FE module in any
slot (bandwidth oversubscription
disabled)
Table 43: Combinations of Line Modules for Line Rate
Performance—SRP-5G+ Module in an ERX705 Router
Possible Combinations of Line
Modules In Slot Groups
NOTE: The total bandwidth of all line modules must not exceed 5 Gbps. To make optimal use of
the available bandwidth, put line modules that require maximum bandwidth in slot 2, 3, or 4.
Examples of Allowed
Combinations
One OCx/STMx POS line
module in slot group 1, a GE/FE
line module in slot group 2, and
one OCx/STMx ATM line
module in slot group 4
Two OCx/STMx ATM line
modules in slot group 1, one
GE/FE line module in slot group
2, and one SM in slot group 3
Examples of Allowed
Combinations
One COCX-F3 line
module in slot group 1,
a GE/FE line module in
slot group 2, and a
OCx/STMx POS line
module in slot group 3
Examples of Allowed
Combinations
Copyright © 2010, Juniper Networks, Inc.
Examples of
Forbidden
Combinations
A GE/FE line module
and any other line
module in slot group
1
Two OCx/STMx POS
line modules in slot
group 1
Examples of
Forbidden
Combinations
Three OCx/STMx
ATM line modules in
any slot group
Two GE/FE line
modules in any slot
group
Examples of Forbidden
Combinations

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.3

Table of Contents