Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 308

JunosE 11.3.x System Basics Configuration Guide
278
Table 33: Types of System Files and Corresponding Extensions
(continued)
Type of File Extension
History *.hty
(reboot.hty)
Log *.log
Macro *.mac
Release *.rel
Script *.scr
Secure Shell *.pub
(SSH) Server
public key
Statistics *.sts
Text *.txt
System files may reside in four locations:
The system space
The user space
A network host
The standby SRP module
The system space contains files for system operation. For example, the current software
configuration is stored in the system space.
The user space is reserved for FTP server operations and has the typical directory structure
of a secure FTP server. The root or top level directory is a read-only directory that contains
two subdirectories:
/incoming—Read-write directory to and from which an FTP client can send and retrieve
files.
/outgoing—Read-only directory from which an FTP client can retrieve files.
Users can transfer files through FTP to the user space from a network host and vice versa.
However, users cannot access the system space through FTP. To install a file from the
user space to the system space, use the copy command. For detailed information about
transferring files between locations, see "Transferring Files" on page 287.
Description
Details of when and why modules rebooted
A series of messages that describe events that occurred on
the system
A macro program
Software releases you can install in the system
A sequence of CLI commands. When you run a script file,
the system executes the commands as though they were
entered at the terminal
Host key for the SSH server
Bulk statistics created when you run the bulkstats
commands
Text file
Copyright © 2010, Juniper Networks, Inc.