Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 365

show running-configuration
show version
Copyright © 2010, Juniper Networks, Inc.
location—Slot that reset; location is offset by two slots at slot 7 and above (the SRP
module in slot 6 shows location as slot 7, the SRP module in slot 7 shows location
as slot 9, and slots 8-13 show location as 10-15, respectively).
build date—Build date of software version
reset type—Cause of reset
Example
host1#show reboot-history
*** Entry 1 ***
time of reset: TUE APR 10 2001 20:25:59 UTC
run state: unknown
image type: diagnostics
location: slot (7)
build date: 0x3abf4337 MON MAR 26 2001 13:25:11 UTC
reset type: user reboot, task "scheduler", reason "not specified"
*** Entry 2 ***
time of reset: TUE APR 10 2001 20:25:44 UTC
run state: unknown
image type: diagnostics
location: slot (8)
build date: 0x3abf5d5f MON MAR 26 2001 15:16:47 UTC
reset type: user reboot, task "scheduler", reason "not specified"
*** Entry 3 ***
time of reset: TUE APR 10 2001 20:25:03 UTC
run state: unknown
image type: diagnostics
location: slot (4)
build date: 0x3abf3ee0 MON MAR 26 2001 13:06:40 UTC
reset type: user reboot, task "scheduler", reason "not specified"
See show reboot-history.
Use to display the configuration currently running on the router, a specified virtual
router, a specified interface, or a specified category of router settings.
See full description and examples in "show running-configuration" on page 258.
See show running-configuration.
Use to display the armed and running releases for every slot in the router and the
operational status of the SRP module and line modules for all E Series routers.
Use the all keyword with the E120 and E320 routers to display the operational status
of the IOAs.
Field descriptions
Model identification
Copyright—Copyright details for the system software
Chapter 5: Managing the System
335