Table 30: Mapping Bulkstats Output To Mib Flies And Cli Configurations For Qos - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide
Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS schema
Bulkstats Output
Column Name MIB File
ifDescr RFC1213
ifIndex RFC1213
SVLAN/VP ID -
Traffic-Class-Name -
ParentNodeShapRate rsacctng
ParentNodeSharedShapRate rsacctng
ParentNodeChildrenWeight rsacctng
220
MIB Object Name CLI Configuration
all
ifDescr –
ifIndex -
- -
- -
rsAcctngParentShapingRate shaping-rate
rsAcctngParentSharedShapRate shared-shaping-rate
rsAcctngParentChildWeight parent-weight
Description
Configure QoS schema for all
queue attributes
A textual string containing
information about the interface.
This string should include the
name of the manufacturer, the
product name and the version of
the interface hardware/software
A unique value, greater than zero,
for each interface. It is
recommended that values are
assigned contiguously starting
from 1. The value for each
interface sub-layer must remain
constant at least from one
re-initialization of the entity's
network management system to
the next re- initialization
The SVLAN or ATM virtual path
ID over which the interfaces of
the specified queue are stacked.
The unique traffic class name
within the traffic policy
configured for the queue.
The shaping rate associated with
the parent interface in the
scheduling hierarchy of the
queue.
The attribute is a 32–bit integer.
The shared shaping rate
associated with the parent
interface in the scheduling
hierarchy of the queue.
The attribute is a 32–bit integer.
The total weight of the child
queues for a parent node in the
scheduling hierarchy.
The attribute is a 32–bit integer.
Copyright © 2010, Juniper Networks, Inc.