Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 314

JunosE 11.3.x System Basics Configuration Guide
host1#dir
Please wait.....
Active/standby file systems are synchronized.
file
--------------------------------------------
disk0:/incoming <DIR>
disk0:/outgoing <DIR>
disk0:810beta13.cnf
disk0:800beta12.cnf
disk0:bng___1.txt
disk0:bng___2.txt
disk0:bng___3.txt
disk0:erx701rel.cnf
disk0:730beta19.cnf
disk0:730beta18.cnf
disk0:erx_8-0-0b0-24.cnf
disk0:7.3run.cnf
disk0:80beta_bce_backup.cnf
disk0:800beta5.cnf
disk0:820beta5.cnf
disk0:810beta16.cnf
disk0:SRP-10Ge_3_SC_08_22_2006_07_39.dmp
disk0:SRP-10Ge_3_SC_04_12_2007_09_47.dmp
disk0:reboot.hty
284
You can include an asterisk (*) at any position in a specified filename as a wildcard.
The asterisk substitutes for zero or more characters in the name. You cannot use a
wildcard in a path.
Bulk statistics .sts files are stored in volatile storage on a RAM disk, and are displayed
only when bulkstats is configured.
NOTE: When you issue the dir command from Boot mode, a reduced set
of file types is displayed.
Field descriptions
file—Name of file or directory (DIR indicates a directory)
size—Physical size of file
unshared size—Size of file in user space
Value of zero indicates that this file has been installed onto the system space and
that there is a link to this file.
Value other than zero indicates that the file has not been installed onto the system
space and equals the physical size of the file.
date—Date that file was created
in use—An exclamation point (!) indicates that the system is using this file
Example 1
size
---------
280944
327011
11092
11092
11092
255400
283141
284503
327404
301635
333228
300575
311616
297764
153268924
182385184
402368
unshared
size
---------
0
0
280944
327011
11092
11092
11092
255400
283141
284503
327404
301635
333228
300575
311616
297764
153268924
182385184
402368
Copyright © 2010, Juniper Networks, Inc.