Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 562

JunosE 11.3.x System Basics Configuration Guide
show configuration
show ip forwarding-table slot
532
See show aaa domain-map.
Use to display configuration information for the virtual routers configured on your router.
You can create a configuration script from the output by saving it as a file with the .scr
extension.
You can exclude information about a particular type of interface.
You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string that you specify. See "Command-Line Interface"
on page 27, for details.
Example
host1#show configuration virtual-router default
virtual-router default
ip domain-lookup
ip name-server 10.2.0.3
ip domain-name "junipercom.com"
!
host f 10.10.0.129 ftp anonymous null
interface null 0
!
interface fastEthernet 0/0
ip address 192.168.1.155 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
no ip multicast-routing
!
mpls rsvp profile default
mpls ldp profile default
!
rtr 1
type echo protocol ipIcmpEcho 10.5.0.200 source fastEthernet0/0
frequency 1
samples-of-history-kept 5
timeout 10000
!
See show configuration.
Use to display the memory used by each VR configured on a line module and free
memory available on the line module.
Field descriptions
Free Memory—Amount of memory free on the line module, in kilobytes
Virtual Router—Name of the virtual routers configured on the line module
Memory (KB)—Amount of memory consumed by the VR, in kilobytes
Copyright © 2010, Juniper Networks, Inc.