Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 252

JunosE 11.3.x System Basics Configuration Guide
Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS
schema (continued)
Bulkstats Output
Column Name MIB File
QLength rsacctng
QBurst rsacctng
QWeight rsacctng
QAssuredRate rsacctng
QREDEnabled rsacctng
QSharShapType rsacctng
QSharShapRate rsacctng
QByteAdjType rsacctng
QByteAdjBytes rsacctng
QFwdedRate rsacctng
222
MIB Object Name CLI Configuration
rsAcctngQueueLength queue-length
rsAcctngBurst burst
rsAcctngWeight weight
rsAcctngAssuredRate assured-rate
rsAcctngRedEnabled RED-enabled
rsAcctngSharedShapingMode shared-shaping-mode
rsAcctngSharedShapingRate shared-shaping-rate
rsAcctngByteAdjType byte-adjustment-type
rsAcctngByteAdjBytes byte-adjustment-bytes
rsAcctngForwardedRate forwarded-rate
Description
The length of the egress queue.
The attribute is a 32–bit integer.
The burst attribute of the egress
queue.
The attribute is a 16–bit integer.
The weight attribute of the
queue. The weight of the queue
determines the bandwidth that
will be allocated to the queue
during congestion.
The attribute is a 16–bit integer.
The assured rate for the queue.
The attribute is a 32–bit integer.
Indicates if the Random Early
Detect (RED) is enabled for the
queue.
Indicates the type of
shared-shaping enabled on the
queue.
Indicates the rate of
shared-shaping enabled on the
queue.
The attribute is a 32–bit integer.
The type of byte adjustment
application configured on the
queue.
The number of bytes for the byte
adjustment application
configured on the queue.
The average forward rate of the
queue. It is averaged over the
rate period of the
statistics-profile associated with
the queue.
The attribute is a 64–bit integer.
Copyright © 2010, Juniper Networks, Inc.