JunosE 11.3.x System Basics Configuration Guide
Hardware Standards
580
Table 57: E Series Non-RFC Software Standards (continued)
Reference
Multilink Frame Relay UNI/NNI Implementation Agreement, FRF.16
(April 2000)
T1M1.3 Working Group—A Technical Report on Test Patterns for DS1
Circuits (November 1993)
Telcordia document GR-253—Synchronous Optical Network (SONET)
Transport Systems: Common Generic Criteria, Revision 3 (September
2000)
Table 58: E Series Hardware Standards
Reference
ACA TS 016-1997
ANSI T1.102-1993 Digital Hierarchy – Electrical Interfaces (1999)
ANSI T1.646-1995 Telecommunications – Broadband ISDN—Physical Layer
Specification for User-Network Interfaces Including DS1/ATM (1995)
ANSI T1.646a-1997 Telecommunications – Broadband ISDN—Physical
Layer Specification for User-Network Interfaces Including DS1/ATM (1997)
AS/NZS 3260:1993, Safety of Information Technology Equipment Including
Electrical Business Equipment
AS/NZS 3548:1995 (CISPR 22 Class A)
CAN/CSA C22.2, No. 60950-00, 3rd Edition, Safety of Information
Technology Equipment
CTR13—Commission Decision of 9 July 1997 on a common technical
regulation for attachment requirements for terminal equipment interface
for connection to 2048 kbit/s digital structured ONP leased lines: 97/521/EC
– OJ No. L215 Vol. 40, August 1997
CTR24—Commission Decision of 9 September 1997 on a common technical
regulation for attachment requirements for terminal equipment interface
for connection to 34 Mbit/s digital unstructured and structured leased
lines: 97/639/EC – OJ No. L271 Vol. 40, 3 October 1997
EIA-310-D Cabinets, Racks, Panels, and Associated Equipment, September
1992
EMC Directive (89/336/EEC)
Protocol or Feature
Multilink Frame Relay
BERT Patterns
SONET APS
redundancy
Protocol or
Feature
Telecom
Cables
Cables and
connectors
Cables and
connectors
Safety
EMC
Safety
Telecom
Telecom
Mechanical
EMC
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 and is the answer not in the manual?
Questions and answers