Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 253

Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS
schema (continued)
Bulkstats Output
Column Name MIB File
QAggDropRate rsacctng
QFwdedPkts rsacctng
QFwdedOctets rsacctng
QGreenDiscardPkts rsacctng
QGreenDiscardOctets rsacctng
QYellowDiscardPkts rsacctng
QYellowDiscardOctets rsacctng
Copyright © 2010, Juniper Networks, Inc.
MIB Object Name CLI Configuration
rsAcctngAggDropRate aggregate-drop-rate
rsAcctngForwardedPackets forwarded-packets
rsAcctngForwardedBytes forwarded-bytes
rsAcctngGreenDropPackets green-drop-packets
rsAcctngGreenDropBytes green-drop-bytes
rsAcctngYellowDropPackets yellow-drop-packets
rsAcctngYellowDropBytes yellow-drop-bytes
Chapter 4: Configuring SNMP
Description
The average drop rate of the
queue, including red, green and
yellow packets. It is calculated
over the rate period of the
queue's statistics profile.
The attribute is a 64–bit integer.
The number of packets that were
forwarded on the queue.
The attribute is a 64–bit integer.
The number of octets that were
forwarded on the queue.
The attribute is a 64–bit integer.
The number of green packets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
The number of green octets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
The number of yellow packets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
The number of yellow octets
which were chosen to be
discarded even though no errors
had been detected to prevent
their being received.
The attribute is a 64–bit integer.
223