Monitoring The Console Settings - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide
motd-banner

Monitoring the Console Settings

show line console 0
274
Use to display an exec banner on a particular line after user authentication (if any) and
before the first prompt of a CLI session.
Banners on the lines are enabled by default; the no version does not reenable banners
on the lines.
See "banner" on page 273 command description for more information about configuring
an exec banner.
Example
host1(config-line)#exec-banner
Use the default version to restore the default setting, in which the banner is displayed
on all lines.
Use the no version to disable the exec banner on the line. If both the exec and MOTD
banners are enabled on a line, issuing the no exec-banner command disables both
the exec banner and the MOTD banner. The no motd-banner command behaves
differently from the no exec-banner command.
See exec-banner.
Use to display an MOTD banner on a particular line when a connection is initiated.
Banners on the lines are enabled by default; the no version does not reenable banners
on the lines.
See "banner" on page 273 command description for more information about configuring
an MOTD banner.
Example
host1(config-line)#motd-banner
Use the default version to restore the default setting, in which the banner is displayed
on all lines.
Use the no version to disable the MOTD banner on the line. If both MOTD and exec
banners are enabled on a line, issuing the no motd-banner command disables the
MOTD banner and leaves the exec banner enabled. The no motd-banner command
behaves differently from the no exec-banner command.
See motd-banner.
You can use the following commands to monitor console settings.
Use to view the parameters configured for all future console sessions and the current
console session.
Example
Copyright © 2010, Juniper Networks, Inc.