Managing The User Space From A Network Host; Table 34: Ftp Commands That The System Supports - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Managing the User Space from a Network Host

Copyright © 2010, Juniper Networks, Inc.
To conserve NVS and minimize the installation time, files are not stored in both the system
space and the user space. When you issue the copy command to install a file from user
space to system space, the E Series router establishes a link to the file, but does not make
a physical copy.
If you enable the system's FTP server (see "Configuring the FTP Server" on page 296), you
can manage files on the user space from an FTP client on a network host. Table 34 on
page 279 lists the FTP protocol commands that the E Series router supports. Whether you
can perform these functions on the user space depends on the features that the FTP
client offers.

Table 34: FTP Commands That the System Supports

FTP Command
HELP
USER
PASS
QUIT
LIST
NLST
RETR
STOR
CWD
CDUP
TYPE
PORT
PWD, XPWD
STRU
MODE
PASV
NOOP
DELE
Function
List supported commands.
Verify username.
Verify password for the user.
Quit the session.
List contents of a directory.
List directory contents using a concise format.
Retrieve a file.
Store a file.
Change working directory.
Change working directory to parent.
Change the data representation type.
Change the port number.
Get the name of current working directory.
Change file structure settings (only stream mode supported).
Change file transfer mode (only stream mode supported).
Make the server listen on a port for data connection.
Do nothing.
Delete a file.
Chapter 5: Managing the System
279