Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 71

Example 2
Copyright © 2010, Juniper Networks, Inc.
strip-domain disable
!
aaa domain-map northeast
virtual-router default
/interf
(Suppressing output until 'interf' is found, press ^C to end...)
interface null 0
interface ip 0/0
arp timeout 21600
!
interface ip 2/0
arp timeout 21600
!
interface ip s10
arp timeout 21600
!
interface atm 2/0
no shutdown
atm sonet stm-1
loopback line
atm uni-version 3.0
atm oam loopback-location 0xFFFFFFFF
--More--
In the following example, the output is displayed until the screen is filled and the --More--
prompt appears. By entering the filter +ip, the user forces the system to filter out all lines
from the remainder of the output that do not contain the string ip. The system displays
only lines that contain the string ip.
host1#show config include-defaults
! Configuration script being generated on FRI AUG 04 2006 12:48:48 UTC
! Juniper Edge Routing Switch ERX-700
! Version: 7.3.0 beta-1.6 [BuildId 5672] (July 11, 2006
! Copyright (c) 1999-2006 Juniper Networks, Inc.
!
boot config running-configuration
boot system erx_7-3-0.rel
boot config running-configuration
boot system 3-3.1.rel
no boot backup
no boot subsystem
no boot backup subsystem
boot revert-tolerance 3 1800
no boot force-backup
!
aaa domain-map jacksonville
virtual-router miami
strip-domain disable
!
aaa domain-map jak
virtual-router default
strip-domain disable
!
aaa domain-map northeast
virtual-router default
--More--
+ip
(Displaying only lines that include 'ip', press ^C to end...)
strip-domain disable
Chapter 2: Command-Line Interface
11:58)
All rights reserved.
41