Monitoring Passwords - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide

Monitoring Passwords

show secrets
412
If you remember the password at this point, you can override this action by entering:
:boot##no disable console authentication
Reload the operating system.
3.
:boot##reload
When the operating system reloads, you can access the console without a password.
NOTE: You can log in to the console without a password until you set a new
password.
You can use the show secrets command to view all current passwords and secrets.
Use to display all passwords and secrets.
Passwords and secrets appear in their encrypted form.
In the mode column, inherited indicates whether a secret was inherited from a lower
password level. The show secrets command displays only secrets configured by the
user; it does not display inherited secrets.
Example
host1#show secrets
encryption
level type
----- ------------
0
1
2
3
4
5 7 (password)
6 7 (password)
7 7 (password)
8 7 (password)
9 7 (password)
10 7 (password)
11 7 (password)
12 7 (password)
13 7 (password)
14 7 (password)
See show secrets.
Current Password Settings
-------------------------
encrypted
password/secret
--------------------
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
zRFj_6>^]1OkZR@e!|S$
mode
----------
configured
inherited
inherited
inherited
inherited
inherited
inherited
inherited
inherited
inherited
Copyright © 2010, Juniper Networks, Inc.