Table 1: Notice Icons; Table 2: Text And Syntax Conventions - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide

Table 1: Notice Icons

Icon Meaning
Informational note
Caution
Warning
Laser warning

Table 2: Text and Syntax Conventions

Convention
Bold text like this
Bold text like this
Fixed-width text like this
Italic text like this
Plus sign (+) linking key names
Syntax Conventions in the Command Reference Guide
Plain text like this
Italic text like this
xxviii
Description
Indicates important features or instructions.
Indicates a situation that might result in loss of data or hardware damage.
Alerts you to the risk of personal injury or death.
Alerts you to the risk of personal injury from a laser.
Table 2 on page xxviii defines text and syntax conventions that we use throughout the
E Series and JunosE documentation.
Description
Represents commands and keywords in text.
Represents text that the user must type.
Represents information as displayed on your
terminal's screen.
Emphasizes words.
Identifies variables.
Identifies chapter, appendix, and book
names.
Indicates that you must press two or more
keys simultaneously.
Represents keywords.
Represents variables.
Examples
Issue the clock source command.
Specify the keyword exp-msg.
host1(config)#traffic class low-loss1
host1#show ip ospf 2
Routing Process OSPF 2 with Router
ID 5.5.0.250
Router is an Area Border Router
(ABR)
There are two levels of access: user and
privileged.
clusterId, ipAddress.
Appendix A, System Specifications
Press Ctrl + b.
terminal length
mask, accessListName
Copyright © 2010, Juniper Networks, Inc.