Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 231

Copyright © 2010, Juniper Networks, Inc.
CollectorStopFailures—Number of times the bulk statistics collector failed during a
collector stop request
DriverErrors—Number of bulk statistics driver errors
FileSizeFulls—Number of times the bulk statistics application ran out of storage
space
CollectorFileNearlyFullTraps—Number of nearly full events posted to the SNMP
agent on this router
CollectorFileFullTraps—Number of file full events posted to the SNMP agent on this
router
Intervals—Number of times the bulk statistics collector has cycled through a collection
PrimaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a primary server
PrimaryFails—Number of primary server transfer failures
SecondaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a secondary server
SecondaryFails—Number of secondary server transfer failures
BulkStats Collector Statistics:
Index—Bulk statistics collector index
CurrSize—Current size of the bulk statistics storage file in bytes
CreateErrs—Number of bulk statistics collector create errors
Last Transfer Failure—Last time that the collector attempted to retrieve statistics
and was unsuccessful
Interval Start Time—Start of current interval or bulk collections. The collector
began collecting bulk statistics at this time.
Interval Stop Time—End of current interval of bulk collections
Dynamic Interface Collector statistics:
Collector Index—Bulk statistics collector index
Slot#—Slot number from which the statistics were obtained
Received—Number of records for dynamic interfaces that were reported by the
specified interface
Transferred—Number of record for dynamic interface that were written to the bulk
statistics (.sts) file.
Dropped—Number of records for dynamic interfaces that were dropped (that is,
not written to the bulk statistics [.sts] file)
Chapter 4: Configuring SNMP
201