Understanding Schemas; Table 24: Data Retrieved According To Schema - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

show bulkstats virtual-routers

Understanding Schemas

Copyright © 2010, Juniper Networks, Inc.
Threshold—Nearly full trap will be posted to the SNMP entity on this system when
this percentage is reached
Traps Sent—Number of times this event was posted to the SNMP entity on this
system
Example
host1#show bulkstats traps
Trap Type State
----------- -------
file-full enabled
nearly-full enabled
See show bulkstats traps.
Use to display information about the bulk virtual router group configuration.
Field descriptions
Collector—Number that identifies the particular data collector, in the range 1–65535
Virtual-Routers—Set of virtual router names (up to 64 names)
Example
host1#show bulkstats virtual-routers
Collector Virtual-Routers
--------- ---------------
33 serviceProviderABC
655 default
See show bulkstats virtual-routers.
You can set a management schema for bulk statistics. A schema is a group of attributes
or counters that provide an efficient way to retrieve specific types of information about
the router. The bulk statistics application supports schemas listed in Table 24 on page 203.
NOTE: There are no explicit schema objects for the if-stack and system
schemas.
Table 24 on page 203 shows the type of data each schema retrieves.

Table 24: Data Retrieved According to Schema

Schema Retrieves
if-stack The interface and interface column configuration. It is a complete retrieval of the
ifStackTable, which stores the configured interfaces and their stacking relationship
on a router.
Threshold Traps Sent
---------- ----------
N/A 0
5 0
Chapter 4: Configuring SNMP
203