Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 224

JunosE 11.3.x System Basics Configuration Guide
194
PrimaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a primary server
PrimaryFails—Number of primary server transfer failures
SecondaryXfers—Number of times the bulk statistics collector has attempted a data
file transfer to a secondary server
SecondaryFails—Number of secondary server transfer failures
BulkStats Collector Information:
Index—Bulk statistics collector index number
CurrSize—Current size of the bulk statistics file in bytes
MaxSize—Maximum size configured for the bulk statistics file in bytes
Intrvl—Time interval between bulk collections in seconds
Mode—How often the collector is set up to collect statistics:
periodic—Collects statistics periodically
single-interval—Collects statistics once only
XferMode—Collect mode configured for the collector:
auto—Agent transfers file when interval expires
manual—Network management system or the user initiates transfers
onFull—Agent transfers file when it reaches the maximum size
State
inProg—Collector is properly configured and currently active
notInSvc—Collector has been decommissioned by a management client
notReady—Collector does not have enough configuration information to go
active
error—Configuration or operational error
Index—Bulk statistics collector index number
Primary-Receiver—Index number of the primary receiver to which the system
transfers data, if defined
Second-Receiver—Index of the secondary receiver to which the system transfers
data
Last Transfer Failure—Last time that the collector attempted to retrieve statistics
and was unsuccessful
Copyright © 2010, Juniper Networks, Inc.