Collecting Bulk Statistics - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Collecting Bulk Statistics

Copyright © 2010, Juniper Networks, Inc.
DeltaRisingEventOwner:
DeltaRisingEvent:
DeltaFallingEventOwner:
DeltaFallingEvent:
------------------------ Delta
DiscontinuityID: 1.3.6.1.2.1.92.1.1.2
DiscontinuityIDWildcard: True
DiscontinuityIDType: timeTicks
---------------------------------------------------------------------------
Owner: unitTest Name: test1
Index: 1
ID: 1.3.6.1.2.1.11.1.0
IDWildcard: False
EntryStatus: active
Index: 2
ID: 1.3.6.1.2.1.11.2.0
IDWildcard: False
EntryStatus: active
Index: 5
ID: 1.3.6.1.2.1.11.30.0
IDWildcard: False
EntryStatus: active
---------------------------------------------------------------------------
Owner: unitTest
Name: eventTest1
Actions: notification set
Enabled: True
EntryStatus: active
------------------------ Notification
Notification: mteTriggerFired
ObjectsOwner: unitTest
Objects: test3
------------------------ Set
Object: 1.3.6.1.2.1.11.1.0
ObjectWildcard: False
Value: -20
ContextName: router
ContextNameWildcard: True
See show snmp management-event.
The router offers an efficient data collection and transfer facility for accounting
applications. The E Series router SNMP MIBs extend the accounting data collection
mechanism defined in the Accounting-Control-MIB (RFC 2513) to include support for
connectionless networks.
Service providers need reasonably accurate data about customers' use of networks. This
data is used for billing customers and must be available at a customer's request.
Accounting applications based on SNMP polling models consume significant network
bandwidth because they poll large volumes of data frequently.
Chapter 4: Configuring SNMP
Objects
Events
183