Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 478

JunosE 11.3.x System Basics Configuration Guide
448
Table 49: Layer 2-Related Protocols (continued)
CLI Name Description of Flow
ethernetArpMiss Ethernet/Bridged Ethernet request to send ARP
ethernetArp Ethernet/Bridged Ethernet reception of ARP packet
ethernetLacp Ethernet LACP packet
ethernetDynamicIf Ethernet/Bridged Ethernet dynamic VLAN interface creation
flisInPayload Firewall/NAT payload
flisInPayloadUpdateTbl Firewall/NAT payload and update table
frameRelayControl Frame Relay LMI packets
frameRelayArp Frame Relay inverse ARP packets
itmL2tpControl IPSec transport mode L2TP control packets
mplsTtlOnRx MPLS TTL expired on ingress
mplsTtlOnTx MPLS TTL expired on egress
mplsMtu MPLS MTU exceeded
pppEchoRequest PPP echo request packets destined for the IC
pppEchoReply PPP echo reply packets destined for the IC
pppEchoReplyFast PPP echo request packets generating an FC-based reply
pppControl other PPP control packets
pppoeControl PPPoE PADx packets
Copyright © 2010, Juniper Networks, Inc.