Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 362

JunosE 11.3.x System Basics Configuration Guide
show processes memory
332
task name
---------------------
aaaAtm1483Config
aaaServer
agent1
ar1EthHelp
.
.
.
templateMgr
timerd
~GONE~
~IDLE~
~INTERRUPT~
task name
-------------------
aaaAtm1483Config
aaaServer
agent1
ar1EthHelp
ar1InternalNetwork
.
.
.
~IDLE~
~INTERRUPT~
See show processes cpu.
Use to display the amount of memory-related resources used by system processes.
Because the router allocates memory to system processes in chunks, issuing this
command performs a cleanup process to gather unused, available memory for
reallocation.
You can display different output variations by using the application, slot, and
virtual-router keywords. In addition, you can combine these keywords in specific ways
to display information combinations of application, slot, and virtual router.
The appearance of parentheses in the output is significant. The parentheses indicate
" partial accountability" of the current memory size. In other words, the values are
accurate for the row in which they appear, but the memory value used for calculating
the sum total for the column may be smaller than the value displayed. This can result
in the sum total for the " current size" column not matching the sum of the values that
appear within the column. This disparity can occur under shared memory conditions
------------------
invocations
times per
invoked second
------- -----------
1 0
52 0
399 0
362856 4
48 0
2346566 32
405202 5
0 0
8840490 121
average
time 5
per second
invocation utilization
(usec) (%)
---------- -----------
0 0
5000 0
9022 0
1 0
19 0
--- 0
5 0
Copyright © 2010, Juniper Networks, Inc.
total
running percent
time running
(msec) time
-------- -------
0 0%
260 0%
3600 0%
590 0%
540 0%
0 0%
184700 0%
360 0%
51050 0%
1 5
minute minute
utilization utilization
(%) (%)
----------- -----------
0 0
0 0
0 0
0 0
0 0
0 0
0 0