JunosE 11.3.x System Basics Configuration Guide
204
Table 24: Data Retrieved According to Schema (continued)
Schema
Retrieves
if-stats
Usage data on sets of interface types. The interface usage data is the ifTable/ifXTable
counters. The ifXTable supports 64-bit counters and the data written into the bulk
statistics file supports the 64-bit counters.
igmp
Statistics associated with various IGMP components.
policy
Statistics associated with a specified policy, a policy type, or traffic tagged by a policy
with a color tag.
qos
QoS statistics on egress queues for various interface types. The QoS schema enables
service providers to keep track of network congestion and monitor oversubscription
on the egress queues of the router.
system
Global system and per-module statistics and information. The global system statistics
retrieved are the sysUpTime and nvsUtilPct. The per-module statistics and information
retrieved include the intPhysicalDesc, the cpuUtilPct, and the memUtilPct.
If-Stats Schema Objects
Table 25 on page 204 describes the if-stats objects that you can configure using the
bulkstats schema subtree if-stats command.
Table 25: if-stats Schema Objects
Object
all
correlator
in-bcast-pkts
in-discards
in-errors
in-mcast-octets
in-mcast-pkts
in-octets
in-policed-octets
in-policed-pkts
in-spoofed-pkts
in-ucast-pkts
Definition
Configure If-stats schema for all stats
Configure If-stats schema for correlator
Configure If-stats schema for in-bcast-pkts
Configure If-stats schema for in-discards
Configure If-stats schema for in-errors
Configure If-stats schema for in-mcast-octets
Configure If-stats schema for in-mcast-pkts
Configure If-stats schema for in-octets
Configure If-stats schema for in-policed-octets
Configure If-stats schema for in-policed-pkts
Configure If-stats schema for in-spoofed-pkts
Configure If-stats schema for in-ucast-pkts
Copyright © 2010, Juniper Networks, Inc.