Management Features; Table 17: Relationship Among Groups, Security Levels, And Views - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x System Basics Configuration Guide

Management Features

142
An SNMP community name
An SNMP view name
A user's privilege level
Read-only (ro)
Read-write (rw)
Administrator (admin)
An IP access list name
Management features of SNMPv3 allow you to specify who will receive notifications and
to define MIB views that users in different groups can access:
Notification—Message that informs you of a status change; the equivalent of a trap in
SNMPv1.
View—Definition of the management information that is available: read, write, or
notification. Predefined views are available for each group:
everything—Includes all MIBs associated with the router, except the packetMirror
MIB
user—Includes all MIBs associated with the router, except the packetMirror MIB and
standard and enterprise MIBs used to configure SNMP operation
nothing—Excludes all MIBs
mirrorAdmin—Includes the packetMirror MIB
User—An individual who requires access to the router. The router may provide
authentication and privacy for the user through SNMPv3. Each user is associated with
a group.
Group—A set of users with the same access privileges to the router. Three predefined
groups are available: admin, public, and private. Table 17 on page 142 shows the security
levels and views associated with these groups.

Table 17: Relationship Among Groups, Security Levels, and Views

Group Name Security Level
admin authentication
and privacy
mirror authentication
and privacy
public none
Read View Write View
everything everything
mirrorAdmin mirrorAdmin
user nothing
Copyright © 2010, Juniper Networks, Inc.
Notification/
Trap View
everything
mirrorAdmin
nothing