Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 228

JunosE 11.3.x System Basics Configuration Guide
show bulkstats collector max-size
show bulkstats collector transfer-mode
198
Interval—Amount of time, in seconds, that the collector transfers data to the receiver
Example
host1#show bulkstats collector interval
Index Interval
----- --------
1 360
See show bulkstats collector interval.
Use to display information about the bulk statistics maximum file size configuration.
Field descriptions
Index—Index number of the bulk statistics collector
MaxSize—Maximum size of the bulk statistics file in bytes
Example
host1#show bulkstats collector max-size
Index MaxSize
----- ------------
1 2097152
See show bulkstats collector max-size.
Use to display information about the bulk statistics transfer mode configuration.
Field descriptions
Index—Index number of the bulk statistics collector
Transfer-Mode:
auto-xfer—Server automatically transfers the bulk statistics files to a remote FTP
server
manual-xfer—Server expects the user to transfer bulk statistics files
on-file-full—Server transfers the bulk statistics file when the file reaches its
maximum size
Primary-Receiver—Receives the bulk statistics sent by the collector
Secondary-Receiver—Serves as a backup to the primary receiver
Example
host1#show bulkstats collector transfer-mode
Index Transfer-Mode
----- -------------
1 auto-xfer
Primary-Receiver Secondary-Receiver
---------------- ------------------
1 2
Copyright © 2010, Juniper Networks, Inc.