Viewing Snmp Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Viewing SNMP Status

show snmp
Copyright © 2010, Juniper Networks, Inc.
1 No such name errors
0 Bad values errors
0 General errors
2 Get-response PDUs
0 SNMP trap PDUs
0 Invalid Message Report PDUs
0 Unknown PDU Handler Report PDUs
0 Unknown Context Report PDUs
0 Unsupported Security Level Report PDUs
0 Not in time Window Report PDUs
0 Unknown Username Report PDUs
0 Unknown Engine ID Report PDUs
0 Wrong Digest Report PDUs
0 Decryption Error Report PDUs
There is no no version.
See baseline snmp.
To view SNMP status on your network, use the following show commands.
Use to display all the information about SNMP status.
To display statistics relative to the current baseline, use the delta keyword.
Field descriptions
Contact—Router's contact person
Location—Router's location
SNMP packets input—Total number of SNMP packets received by the router
Bad SNMP version errors—Number of SNMP PDUs with a bad version number
Unknown community name—Number of SNMP PDUs that had an unrecognized
community name
Illegal operation for community name supplied—Number of access violations
based on the configured privilege level for community strings
Encoding errors—Number of AS number version 1 encoding and decoding errors
Number of requested variables—Number of variable bindings processed by the
SNMP agent
Number of altered variables—Number of variable bindings processed successfully
in SNMP set commands
Get-request PDUs—Number of get-exact SNMP PDUs processed
Get-next PDUs—Number of get-next SNMP PDUs processed
Set-request PDUs—Number of set SNMP PDUs processed
Chapter 4: Configuring SNMP
229