Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 229

show bulkstats interface-type
show bulkstats receiver
Copyright © 2010, Juniper Networks, Inc.
See show bulkstats collector transfer-mode.
Use to display information about the bulk statistics interface types configuration.
Field descriptions
Interface Types:
Index—Index number of the interface type entry
Type—Interface type for which bulk statistics collection is configured
CollectorIndex—Index of the collector to which the interface type applies
State
active—Interface type is properly configured and currently active
notInSvc—Interface type has been decommissioned by a management client
notReady—Interface type does not have enough configuration information to go
active
error—Configuration/operational error
Example
host1#show bulkstats interface-type
Interface Types:
Index Type
----- ----------------------
1 ppp
See show bulkstats interface-type.
Use to display information about the remote file configuration of the bulk statistics
receiver.
Field descriptions
Index—Index number of the receiver
RemoteFileName—Hostname, path, and filename of the remote FTP server
Index—Index number of the receiver
State
active—Receiver is properly configured and currently active
notInSvc—Receiver has been decommissioned by a management client
Chapter 4: Configuring SNMP
Collector State
--------- --------
1 active
199