Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 251

Table 30: Mapping Bulkstats Output to MIB Flies and CLI Configurations for QoS
schema (continued)
Bulkstats Output
Column Name MIB File
QDropProfile rsacctng
QQueueProfile rsacctng
QSchedulerProfile rsacctng
QStatsProfile rsacctng
QShapMode rsacctng
QShapRate rsacctng
Copyright © 2010, Juniper Networks, Inc.
MIB Object Name CLI Configuration
rsAcctngDropProfile drop-profile
rsAcctngQueueProfile queue-profile
rsAcctngSchedulerProfile scheduler-profile
rsAcctngStatisticsProfile statistics-profile
rsAcctngShapingMode shaping-mode
rsAcctngShapingRate shaping-rate
Chapter 4: Configuring SNMP
Description
The drop profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
The queue profile name
associated with the egress
queue. This attribute can be 32
characters long.
The attribute is a 32–bit
character string.
The scheduler profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
The statistics profile name
associated with the egress
queue.
The attribute is a 32–bit
character string.
The shaping mode associated
with the egress queue.
In the shape mode, is used to
control the downstream rate for
different media.
The shaping rate attribute of the
egress queue.
In the shape mode, when queue
is guaranteed a certain
percentage of bandwidth, the
queue cannot use more than the
allocated bandwidth even if the
link is idle. For egress queues, the
QShapRate attribute returns the
bit rate at which the traffic for
the queue is shaped.
The attribute is a 32–bit integer.
221