Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 227

show bulkstats collector description
show bulkstats collector interval
Copyright © 2010, Juniper Networks, Inc.
Index CollectorIndex
----- --------------
1 1
Index Create-Delete Time Stats
----- ------------------------
1 enabled
Index Subtree List
----- -------------------------------------------------------------
1 all
Interface Types:
Index Type
----- ----------------------
1 Ppp
6 Ethernet
11 Atm1483
Receiver Information:
Index RemoteFileName
----- -------------------------------------------------------
1 host:/upload/bulkStas.sts
Index State
----- --------
1 notReady
Collector Virtual-Routers
--------- ---------------
33 serviceProviderABC
655 default
See show bulkstats.
Use to display information about the collector's file description.
Field descriptions
Index—Index number of the bulk statistics collector
FileDescription—Descriptive information added to the bulk statistics file with the
bulkstats collector description command
Example
host1#show bulkstats collector description
Index FileDescription
----- -----------------------
1 Bulk SNMP Statistics Collection
See show bulkstats collector description.
Use to display information about the collector transfer interval configuration.
Field descriptions
Index—Index number of the bulk statistics collector
State
--------
active
Create-Delete Interface Types
-----------------------------
IP
CollectorIndex
--------------
1
1
1
Status
---------------------------------------------
Copy source does not exist or is unreachable
Chapter 4: Configuring SNMP
State
--------
active
active
active
197