Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual page 420

JunosE 11.3.x System Basics Configuration Guide
390
slot state type
---- ------- ---------- ------- ----- ------------------ --------------
0 standby SRP-10Ge
1 online SRP-10Ge
2 --- ---
3 --- ---
4 online CT3-12
5 online OC3-4A-APS enabled
6 online GE
host1#configure terminal
Enter configuration commands, one per line.
host1(config)#interface fastethernet 0/0
host1(config-if)#ip address 10.6.130.83 255.255.128.0
host1(config-if)#exit
host1(config)#ip route 0.0.0.0 0.0.0.0 10.6.128.1
host1(config)#exit
host1#show config
! Configuration script being generated on TUE SEP 14 2004 13:22:06 UTC
! Juniper Edge Routing Switch ERX-700
! Version: 6.0.0 beta-1.8 [BuildId 2538] (September 7, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 10
!
boot config running-configuration
boot system erx_6-0-0b1-8.rel
no boot backup
no boot subsystem
no boot backup subsystem
no boot force-backup
!
! Note: The following commands are here to ensure that all virtual routers and
! vrfs are created before other commands that may need to reference them.
! These commands will be repeated further on as each virtual router and vrf
! has its configuration presented.
!
virtual-router default
virtual-router vr8
!
!
hostname "host1"
exception protocol ftp anonymous null
!
controller t3 2/0
[...]
!
interface fastEthernet 0/0
ip address 10.6.130.83 255.255.128.0
!
ip route 0.0.0.0 0.0.0.0 10.6.128.1
! Trap Source: <not configured>
! Note: SNMP server not running.
!
admin spare running release
enabled --- erx_7-1-0.rel
enabled --- erx_7-1-0.rel
--- --- ---
--- --- ---
enabled --- erx_7-1-0.rel
--- erx_7-1-0.rel
enabled --- erx_7-1-0.rel
End with ^Z.
slot uptime
---
25d03h:28m:49s
---
---
25d03h:24m:46s
25d03h:24m:22s
25d03h:24m:44s
12:46)
All rights reserved.
Copyright © 2010, Juniper Networks, Inc.