Viewing Snmp Status - Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x System Basics Configuration Guide

Viewing SNMP Status

To view SNMP status on your network, use the following show commands.
show snmp
240
Monitoring SNMP
0 Unknown Context Report PDUs
0 Unsupported Security Level Report PDUs
0 Not in time Window Report PDUs
0 Unknown Username Report PDUs
0 Unknown Engine ID Report PDUs
0 Wrong Digest Report PDUs
0 Decryption Error Report PDUs
There is no no version.
See baseline snmp.
Use to display all the information about SNMP status.
To display statistics relative to the current baseline, use the delta keyword.
Field descriptions
Contact Router's contact person
Location Router's location
SNMP packets input Total number of SNMP packets received by the router
Bad SNMP version errors Number of SNMP PDUs with a bad version
number
Unknown community name Number of SNMP PDUs that had an
unrecognized community name
Illegal operation for community name supplied Number of access
violations based on the configured privilege level for community strings
Encoding errors Number of AS number version 1 encoding and
decoding errors
Number of requested variables Number of variable bindings processed
by the SNMP agent
Number of altered variables Number of variable bindings processed
successfully in SNMP set commands
Get-request PDUs Number of get-exact SNMP PDUs processed
Get-next PDUs Number of get-next SNMP PDUs processed
Set-request PDUs Number of set SNMP PDUs processed